Getting fast and steady WiFi throughout the house can be a challenge. Perhaps there’re signal drops in the porch or maybe the upstairs bedroom contains dead zones (blind spots). Whatever the reason, the main thing is that you don’t get reliable wireless network in your home. Given that all the smart devices, concrete walls, and metal equipments result in interferences, so even the most powerful router can fail to provide wireless signals in some places. However, Netgear WiFi extender setup is the simplest way to boost your existing network range and coverage. If you are unsure that you need one, have a look at 5 common reasons.
- Are you using old router?
Usually, users pay no attention to wireless routers until they work fine. However, it’s recommended that you must consider its age and update the firmware from time to time even if it is properly working. Once a router goes older, it requires newer software along with a newer hardware to improve security and remove chances of feasible exploits.
Before going for Netgear extender setup, update your old router to the latest firmware. Doing so will offer you an enhanced Internet range as well as coverage. In case your router is so old that nothing can be done with it, set up and install a new extender via mywifiext instead of spending lots of bucks on a new router or access point.
- Dead zones
Are you getting WiFi signals only in some areas in your home? If a big yes, then you need a wireless extender setup. The areas in your home where you don’t get proper signals are known as dead zones or blind spots. Even your router or main access point fails to cover them. It may also happen that your router is placed in upstairs bedroom but you spend most of your time downstairs. In this case, you will get slow or weak signals which are truly annoying. So, rather than experiencing slow WiFi signals in dead zones go for a wireless repeater. Opting for a booster will provide an instant improvement in your network range.
- Your ISP (Internet Service Provider) at fault
Poor WiFi connectivity is not always be caused by the main access point. You will probably be unaware of the fact that the speed of Internet entirely depends on your service provider. There may be some technical difficulties in your ISP which can slow down the Internet speed.
Also, ISPs set up some filters and configurations that may offer poor performance. In case all your devices work perfectly but you still get a poor connection, then you should contact your ISP. Once done, they will file your complaint and resolve all your issues shortly.
- Your network connection doesn’t reach outside
During summer vacation, people love spending as much time as they can outdoors. One can easily get fast Internet speed in nearby places from the main access point if you are getting a reliable network connection from ISP and your monthly data plan is not restricted by bandwidth caps.
Best, put your router at a place with minimal physical interferences. It’s recommended to limit the number of concrete, solid walls and barriers in the path of signals. If you want to access the Internet to outdoors, opt for a range expander. You have to put it in a room which has an outdoor access point.
- You are using wrong bandwidth channel
Have you ever looked through the settings of your home router? If so, you must have noticed a list of channels. This list is set up on auto mode of selection. However, one can manually change the channel as per their needs. On the basis of interference level, some bandwidth channels can be faster than others. In order to change settings, you have to enter default IP address of your device in the address bar of your preferred web browser.
There are mainly two bandwidth channels: 2.4GHz and 5GHz. Given that every 2.4GHz channel overlaps which results in bad connectivity. So, you can move to 5GHz channel to get improved wireless signals.